Tiger parrot breeding box production

Breeding box box system: Choose strong and durable wooden materials such as pine wood, fir, and make the wood for a 32cm × 16cm × 16cm box.Open a nest with a diameter of about 5-6cm on the side of the box.Production inside the breeding box: You need to lay a layer of wood chips at the bottom of the breeding box, and then a partition in the middle of the box.When the weather is cold in winter, heating and thermal insulation devices such as electric blankets must be placed.

1. Breeding box box system

When creating a breeding box for the tiger parrot, you should choose a stronger wooden material, such as fir and pine wood. The breeding box made is relatively strong, and it is not easy to be broken by the tiger parrot that is not easy to be breeding.Then determine the size of the breeding box. Due to the large size of the tiger parrot, it is recommended that the breeding nest of the tiger parrot is larger. The specifications of about 32cm × 16cm × 16cm are more appropriate.After the box is done, leave a nest in the breeding box, and the diameter can be around 5-6cm.

2. Internal production of breeding boxes

After making the box, the owner needs to put a layer of pads in the box in the box, which can spread a layer of pet special fragmented wood chips.These wood chips can effectively prevent tiger parrots from destroying breeding boxes and can also play a warm role for young birds.Wood chips also need to place a partition in the middle of the box, which is more conducive to the use of female birds during breeding, and can effectively prevent young birds from falling out of the breeding box.A round hole of about 5cm should also be opened on the partition to facilitate the entry of female birds.In the cold winter, some warm equipment is placed inside the breeding box of the tiger parrot. You can install a electric blanket at the bottom of the box to keep the tiger parrot warm.